Bacon Pecan Brittle Recipe (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Whether it's during the cooking, cooling, or storage process, moisture and humidity can ruin the best batch of brittle in minutes, leaving you with a soggy, sticky mess. This is why eliminating moisture anywhere you can is our top tip on how to store peanut brittle.

In a nonstick saucepan, heat and stir sugar, corn syrup, water and salt over medium heat until sugar has dissolved. Over high heat, using a candy thermometer, cook sugar mixture to a hard crack stage (290 °F). Add pecans and butter and cook to 300 °F stirring all the time to keep the nuts from burning.

Let the brittle completely cool and then break into pieces. Store in an airtight container or a plastic freezer bag as this will prevent the brittle from becoming sticky and breaking down. Store at room temperature or in the refrigerator for up to two weeks.

Just as in homemade syrup or caramel corn, baking soda causes a unique chemical reaction (basically a lot of rising foam) that is crucial in creating the right texture in peanut brittle. If you make it without baking soda but you will notice the brittle is a bit harder to bite through.

Quickly stir in butter and baking soda, then immediately pour mixture onto the prepared baking sheet. Quickly use 2 forks to lift and pull the mixture into a 12x14-inch rectangle. Let cool until completely firm, at least 30 minutes. Use a mallet to break peanut brittle into pieces.

Brittles are typically composed mostly of sugar, while toffees contain a fair amount of butter and in some cases milk. This makes toffees fuller and richer in taste, while brittles are more purely sweet and sugary. Brittles are also much thinner than most toffees.

Ingredients 1 Stick of butter 1/2 of brown sugar Pinch of salt 1 cup of pecans 1tsp of vanilla Caramelize the butter and sugar Add salt and vanila once cooled Drizzle over graham crackers evenly Drizzle pecan over caramel Bake in the oven until caramel is bubbly. About 10 mins on 350 Let cool and enjoy!

Pralines have a lot in common with nut brittle, with the difference being mostly in the addition of cream and the cooking temperature––the sugary syrup used to coat pralines is heated to a soft-ball consistency, a lower temperature than the hard-crack stage of peanut brittle.

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

Can I use foil instead of parchment paper for peanut brittle? ›

To protect the counter where you will be spreading hot candy, use parchment. It works as well as aluminum foil for the purpose, plus it has a centuries-long clean record.

Why did my peanut brittle turn out chewy? The likely cause is that the sugar mixture didn't reach the proper hard crack stage temperature. Ensuring it reaches 300˚F is key to getting that classic brittle texture.

Put it in a pan on low heat and very slowly melt it. Once it begins to melt you can increase the heat a bit. The trick to this is that you have to stir it constantly in order to keep the peanuts from burning. You're going to want to bring it back to 300F, then immediately pour into the prepared pan.

Dried peanuts may require boiling up to 24 hours until they soften. If your water is hard, full of minerals, or you are boiling at high altitude, then your boiling times for dried peanuts may be greater than 24 hours.

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Not spreading the mixture thinly enough: If the peanut brittle is too thick (usually because you used too small of a pan), it may not cool and harden properly. Be sure to spread the mixture as thinly as possible in the pan. 4. Humidity: Humidity can affect the hardening process of the peanut brittle.